How To Put Wallpaper On The Wall? Practical Tips

Wallpaper is one of the best wall decoration alternatives as it provides unique patterns that make the space look modern and cozy. In addition, it is ideal for masking imperfections on the walls.

Wallpaper is a facing material that is used to cover walls and decorate apartments in a technique other than painting. This method uses a large variety of patterns that make the spaces look more stylish, harmonious and original. Find out in this article how to put wallpaper on the wall !

This decorative element was created in the East in the 15th century. However, it has not lost its relevance as it provides finishes that beautify the space, reflect the personality and counteract monotony. In addition, it is a resistant, washable and versatile material.

There are different wallpaper models to suit all needs and areas of the home. Paper wallpaper is a printed sheet that does not have an additional coating. Vinyl, on the other hand, has a protective layer that insulates moisture or heat.

Textured wallpapers, on the other hand, create a relief that conceals wall imperfections. In order to properly lay the wallpaper on the wall , several factors must be taken into account.

Step by step: how to put wallpaper on the wall

Wallpaper is one of the most recommended decorations because it is inexpensive and easy for a professional to install. Similarly, wallpapers are more and more often used, because they emphasize the character of the furniture and allow you to personalize the interior.

1. If you want to put wallpaper on a wall, first evaluate the condition of the wall

First, a trained professional should check and evaluate the wall for defects that could damage the wallpaper. If the walls show any unevenness, scrape them with a spatula, locate the causes and repair the entire area.

Then you need to thoroughly cover the holes with gypsum or plaster and sand it to make the wall even and smooth.On the other hand, if the wall is healthy inside, it is enough to even out the areas that have unevenness to make the wallpaper look smooth.

Not all walls are immediately suitable for wallpaper. Some require repair first.

2. Clean the wall to properly lay the wallpaper on the wall

The second phase is to wash the walls to avoid the accumulation of dust particles that affect the strength of the adhesive. In the same way, removing dirt is essential to prevent the proliferation of bacteria that could damage the wallpaper in the future.

Walls should be cleaned with clean vinegar to eliminate the presence of microorganisms. In addition, wiping with hot water is ideal for combating dirt and unpleasant odors. After that, the surfaces must dry completely.

3. Measure the wall!

Before laying the wallpaper, a hired professional should measure the length and width of the walls to determine how many rolls of wallpaper will be needed. Consider adding a few extra centimeters in case you need to use them as a reserve in case of possible difficulties.

You can then mark the measurements on the wallpaper to start cutting out all the pieces you need and make it easier to lay. When trimming, it is important to use a smooth ruler to help you get even edges.

4. Apply glue

Using a brush without other products, apply glue to the wall on which you want to lay the wallpaper. This tool is indispensable because it allows the liquid to be spread over all areas and prevents the formation of lumps that spoil the final effect.

After that, glue should also be applied to the inner surface of the wallpaper, as this provides greater adhesion and safety. It is important not to leave lumps that will cause the fabric to wrinkle or crack.

5. Stick the first pieces of wallpaper to the walls

You should start sticking wallpaper from the corners and the highest surfaces to get a clear picture of the whole thing and to work more comfortably. When sticking the sheet to the wall, be sure to move the brush from top to bottom to prevent bubbles from forming and keep the piece whole.

When installing wallpaper on doors or windows, use sheets that have not been trimmed to the centimeter. The point is that these areas have curves that need to be glued very carefully and then cut off the excess sheet.

6. Place the remaining sheets of wallpaper

The walls are so large that there is no wallpaper that can cover it in one piece. As a result, you have to lay the wallpaper on the wall in parallel strip by strip.

However, it is important that you cannot see the seams between the individual stripes. Therefore, all the pieces of wallpaper must be glued from top to bottom so that they fit exactly along the edge, maintaining the order of the patterns and achieving a uniform appearance.

In addition, large amounts of glue should be used on the joints between one sheet and the other in order to avoid peeling off. In this way, we install each subsequent sheet of wallpaper until the entire wall is covered.

7. Trim off any excess paper

After the entire wall has been completely papered over, all scraps of paper are cut off and the finishing details are refined. This last step should be done with a tool that cuts straight to avoid irreparable damage.

Tips that should be remembered to properly lay the wallpaper on the wall

Wallpaper allows you to arrange spaces in a unique way and attract the attention of guests more. Therefore, there are a few tips that will help you achieve and maintain the desired effect of the decoration.

Choose the right wallpaper

You have to choose the perfect type of wallpaper for each space. That is, one that is resistant to moisture, heat or, if necessary, the intensity of sunlight.

On the other hand, the wallpaper pattern should match the rest of the colors and decorations in the house. In this way, all elements blend in perfectly with each other.

Pay particular attention to the glue

When installing wallpaper , use high-quality glue, which guarantees durability and resistance for a long time. In addition, you need to choose a product that is suitable for the type of wall and does not change the quality of the interior materials.

The design must match the furniture and other elements in the house so that it does not interfere with the decor of the surroundings.

Don’t forget about the electric sockets

Don’t forget to carefully discover all electrical sockets. This aspect is crucial to avoid short circuits or that no unsightly bulges remain on the wall.

It should be noted that the hole for the electrical outlet should not be cut before placing the wallpaper on the wall. The cut-out hole may turn out to be larger or smaller than the appropriate size and spoil the entire aesthetics of the wall.

For this reason, the wallpaper should cover the entire surface of the outlet and then cut to the exact contour. For this process, it is necessary to use a ruler and a tool that will allow you to make even cuts.

Take care of effective maintenance

When installing, learn about the characteristics of the wallpaper and the requirements for proper care. Regular cleaning of dust build-up is essential to avoid stains and drastic color changes to patterns.

For example, vinyl wallpapers can be cleaned with a damp cloth, and paper ones with a dry cloth or a vacuum cleaner.

To put wallpaper on the wall, you need to plan everything carefully

Planning is a must not be missed when it comes to wallpapering your walls. This phase allows you to set a budget, hire the best experts, create a diagram of the patterns you want to put on, and select the type of wallpaper.

With the planning time involved, you can agree on a suitable timing for the installation, as it is a process that should not be carried out on the spot. In addition, at such times, a professional can give you the best advice on how to improve your home decoration.